- Images
- Videos
Compact and versatile four-sided planer / moulder
Four-sided Moulder and Planer for full flexibility to produce finished timber.
MP260 Planer / Moulder
As low as
Special Price
NZD 27,616.61
Regular Price
NZD 31,087.59
Compact and versatile four-sided planer / moulder
Four-sided Moulder and Planer for full flexibility to produce finished timber.
The MP260 four-sided planer / moulder is a versatile, compact machine engineered for professional woodworkers, carpenters, or joiners in the construction trade. Affordable and easy to use, the MP260 planes and moulds boards on all four sides in a single pass into a variety of professionally finished products including flooring, planed boards, crown moulding, cabinet trim, paneling, door and window frames, and furniture components.
Centralized Control Panel
Allows the operator to start/stop all 4 cutter and power feed motors separately.
Easy-to-change Knife Profiles
Changing knives is simple and takes approximately 10 to 20 minutes.
Variable Feed Rate
Is adjustable from 2.5-14 m/min for 60 Hz.
Adjustable Table Height
The table height is easily adjusted with a manual hand crank.
Multiple Extraction Points
Located near the cutters connect with your chip extraction system to keep chips from building up in the machine.
Large Viewing Window
Allows supervision of the entire cutting process from rough sawn boards to final products.
| 4-sided processing | |
|---|---|
| Planing Width | 20-240 mm |
| Planing Height | 15-95 mm |
| Min. Material Length | 450 mm |
| 2-sided processing | |
| Planing Width | 20-280 mm |
| Planing Height | 15-200 mm |
| Min. Material Length | 450 mm |
| 1-sided processing | |
| Planing Width | 20-305 mm |
| Planing Height | 15-220 mm |
| Min. Material Length | 450 mm |
| Top Horizontal Cutterhead | |
| Diameter | 72 mm |
| Width | 410 mm |
| Power | 3 kW |
| Max. Planing Depth | 5 mm |
| Max. Moulding Depth | 20 mm |
| Bottom Horizontal Cutterhead | |
| Diameter | 72 mm |
| Width | 300 mm |
| Power | 3 kW |
| Max. Planing Depth | 4 mm |
| Max. Moulding Depth | 5 mm |
| Side Cutterheads | |
| Spindle Diameter | 30 mm |
| Max. Height | 100 mm |
| Max. Diameter | 140 mm |
| Power | 3 kW |
| Max. Planing Depth | 5 mm |
| Max. Moulding Depth | 20 mm |
| Power | |
| Total Power | 12.5 kW |
| Power Requirements | 3-phase, 400 V, 50 Hz, 27.45 A (ECO) 3-phase, 400 V, 50 Hz, 28.8 A (PRO) |
| Feed System | |
| Power | 0.18 kW (ECO) 0.37 kW (PRO) |
| Feed Speed | 5 m/min (ECO) 2-11 m/min (PRO) |
| Dust Collection Specifications | |
| Dust Extraction Ports | 1x 125 mm 3x 100 mm |
| Recommended Airflow | 4000 m3/h |
Get a Quote